HINO · 2022-04-14
SB-22-007 2020MY CONVENTIONAL DTC P0005 AND/OR P20DE, P24A1, P24A2
P0005 · 제조사 기술 자료
목록의 차량은 조사 단서입니다. 제조사 자료에서 엔진, 생산 기간, 소프트웨어 조건을 확인하세요.
P0005 ← 이 코드는 무엇을 뜻하나요?5 결과
HINO · 2020-07-23
20MY Conventional trucks equipped with a bubbler filter 23304-EV460 may set Diagnostic Trouble Codes (DTC's) P20DE and/or P0005 under some conditions. If a truck comes into your location exhibiting these DTC's and is equipped with the 23304-EV460 bubbler filter, replace the filter with 23304-EV023 and retest.
HINO · 2016-08-02
Engine - COE Trucks (155, 155h, 195, or 195h) An enhanced fuel cut valve is available to address a potential sticking coindition that results in excess residual pressure in the dosing injector (7th injector) supply pipe. A stickingf fuel cut valve may result in the following DTC'S (Diagnostic trouble codes) setting. P0005/P20DE/P20DF In Engine ECU.
HINO · 2016-08-02
SB-16-020 An enhanced fuel cut valve is available to address a potential sticking condition that results in excess residual pressure in the dosing injector (7thinjector) supply pipe. A sticking fuel cut valve may result in the following DTC?s (diagnostic trouble codes) setting: 1. If DTC P0005 (fuel cut valve stuck closed) sets in the engine ECU, replace the fuel cut valve with the part number listed below. 2. If DTC P20DE (pressure sensor performance invalid) or DTC P20DF (pressure sensor signal too low) set in the engine ECU, this could be a result of the fuel cut valve sticking. Follow the workshop manual diagnostic procedure in section 4 of the Hino Workshop Manual (J05E Engine Control System) for the DTC. Also, inspect for signs of fuel contamination that could restrict the fuel…
HINO · 2016-08-02
SB-16-019 An enhanced fuel cut valve is available to address a potential sticking condition that results in excess residual pressure in the dosing injector (7thinjector) supply pipe. A sticking fuel cut valve may result in the following DTC?s (diagnostic trouble codes) setting: 1. If DTC P0005 (fuel cut valve stuck closed) sets in the engine ECU, replace the fuel cut valve with the part number listed below. 2. If DTC P20DE (pressure sensor performance invalid) or DTC P20DF (pressure sensor signal too low) set in the engine ECU, this could be a result of the fuel cut valve sticking. Follow the workshop manual diagnostic procedure in section 4 of the Hino Workshop Manual (J08E Engine Control System) for the DTC. Also, inspect for signs of fuel contamination that could restrict the fuel…