Ver

P1A0E · Comunicados do fabricante

A relação com um veículo é uma pista. Confirme motor, produção e software na documentação do fabricante.

P1A0E ← O que significa este código?

3 Resultados

TSB 21-2338 ↗

FORD · 2021-09-29

Some 2021 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTCs) P0A1A:06 and/or P1A0E:64 stored in the secondary on board diagnostic control module C (SOBDMC), also referred to as the inverter system controller (ISC). These DTCs may be set due to an issue related to electric motor performance. To correct the condition, follow the Service Procedure steps to identify a concern with the hybrid drive unit.

SSM 50151 ↗

FORD, LINCOLN · 2021-09-24

Some 2020-2021 Explorer/Aviator Hybrids, 2021 Corsair Hybrid, 2021 F-150 PowerBoost, and 2021 Mustang Mach-E vehicles may exhibit a no-start with a Stop Safely Now warning message in the instrument panel cluster (IPC). The vehicle may have one or more of the following DTCs P0A23, P0A6F, P0A72, P0A75, P0A71, P0A74, P0A77, P0DFA, P06B1, P0A47, P1A0E set by the secondary on-board diagnostic module C (SOBDMC) or secondary on-board diagnostic module B (SOBDMB). This may be due to a drop in the 12-volt circuit. These DTCs will often occur at vehicle key-on and may be difficult to reproduce. Before replacement of the SOBDMC or SOBDMB, diagnose any low voltage DTCs (P0562, U3003) in other modules in the 12V system. If low voltage (less than 10V) is observed in these DTCs snapshot, diagnose the…

TSB 21-2072 ↗

FORD · 2021-05-11

Some 2021 F-150 vehicles equipped with a 3.5L PowerBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTCs) P0A1A and/or P1A0E stored in the secondary on board diagnostic control module C (SOBDMC), also referred to as the inverter system controller (ISC). These DTCs may be set due to an issue related to electric motor performance. To correct the condition, follow the Service Procedure steps to identify a concern with the hybrid drive unit.