P0461 · 原廠技術資料

JEEP · 2026-10-10

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P2237-00 - O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240-00 - O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251-00 - O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254-00 - O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243-00 - O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247-00 - O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B-00 - O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1. ● P015D-00 - O2 Sensor Delayed Response - Lean…

JEEP · 2026-10-10

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P2237-00 - O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240-00 - O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251-00 - O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254-00 - O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243-00 - O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247-00 - O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B-00 - O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1. ● P015D-00 - O2 Sensor Delayed Response - Lean…

RAM · 2026-10-06

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P2237-00 - O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240-00 - O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251-00 - O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254-00 - O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243-00 - O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247-00 - O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B-00 - O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1. ● P015D-00 - O2 Sensor Delayed Response - Lean To…

RAM · 2026-10-03

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P2237-00 - O2 Sensor Positive Current Control Circuit/Open Bank 1 Sensor 1. ● P2240-00 - O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 1. ● P2251-00 - O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 1. ● P2254-00 - O2 Sensor Negative Current Control Circuit/Open Bank 2 Sensor 1. ● P2243-00 - O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1. ● P2247-00 - O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1. ● P015B-00 - O2 Sensor Delayed Response - Lean To Rich Bank 1 Sensor 1. ● P015D-00 - O2 Sensor Delayed Response - Lean…

CHRYSLER, DODGE, JEEP, RAM · 2026-07-06

Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.

DODGE · 2026-07-06

Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for any bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way. This GPOP applies to 2021-2022MY WK & 2021-2025MY WD vehicles with extended crank condition due to loss of fuel pressure.…

CHRYSLER, DODGE, JEEP, RAM · 2026-06-17

Fuel Delivery Module Before replacing the fuel module for DTCs P0461 and P062A and other not start, long crank, fuel gauge accuracy and drivability issues, the technician should disconnect the electrical connector at the pump and perform a visual inspection of the connector for and bent, spread, or pushed out terminals. Repair any issues found. Reconnect the plug and perform a push pull push to ensure the connector is fully installed. Then perform 3 keys cycles and listen to hear if the fuel pump is operational. If the fuel pump is heard that indicates that everything is operating correctly. If the pump is heard replacement is not necessary, any replacement will function in the same way.

JEEP · 2026-03-21

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0111-00 - Intake Air Temperature Sensor 1 Circuit Range Performance Bank 1. (In Active or Stored status) ● P0071-00 - Ambient Air Temperature Sensor Performance. (In Active or Stored status) ● P0072-00 - Ambient Air Temperature Sensor Circuit "A" Low. (In Active or Stored status) ● P0073-00 - Ambient Air Temperature Sensor Circuit "A" High. (In Active or Stored status) ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or. (In Active or Stored status) ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1. (In Active or Stored…

JEEP · 2025-08-05

Flash: Powertrain Control Module (PCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● **U0104-00 - Lost Communication With Cruise Control Module. (NA Market Only) ● U0405-00 - Invalid Data Received From Cruise Control Module. (NA Market Only)** ● P018B - Fuel Pressure Sensor "B" Circuit Range/Performance. ● P00C6 - Fuel Rail Pressure Too Low - Engine Cranking Bank 1. ● P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P0461 - Fuel Level Sensor "A" Circuit Range/Performance. ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. ● P0604-00 - Internal Control Module Random Access Memory Ram Error. ● P060C-00 - Internal Control…

JEEP · 2025-08-05

Flash: Powertrain Control Module (PCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● **U0104-00 - Lost Communication With Cruise Control Module. (NA Market Only) ● U0405-00 - Invalid Data Received From Cruise Control Module. (NA Market Only)** ● P018B - Fuel Pressure Sensor "B" Circuit Range/Performance. ● P00C6 - Fuel Rail Pressure Too Low - Engine Cranking Bank 1. ● P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P0461 - Fuel Level Sensor "A" Circuit Range/Performance. ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. ● P0604-00 - Internal Control Module Random Access Memory Ram Error. ● P060C-00 - Internal Control…

KIA · 2025-06-05

VOLUNTARY EMISSIONS SERVICE CAMPAIGN: ENGINE CONTROL MODULE LOGIC IMPROVEMENT (SC333) - This bulletin provides information to upgrade the ‘Engine Control Module’ (ECM) system software on certain 2025MY Carnival (KA4) vehicles equipped with 3.5L GDI Lambda III engines produced from April 15, 2024 through November 27, 2024. The subject vehicles may have been produced with engine calibration that may cause the vehicle to release air pollutants that exceed Federal and California standards and cause the illumination of the Malfunction Indicator Lamp (MIL) with DTC P046100. These standards were established to protect the public health and welfare from the dangers of air pollutants.

GENESIS · 2025-05-13

Certain 2025MY GV80 and GV80 Coupe (JX1) vehicles equipped with the 3.5T-GDI Lambda III engine may NOT experience a warning lamp illumination of DTC P0461/P2066 when the calculated fuel consumption and the fuel consumption calculated from the fuel level sensor signal is over its threshold value. Follow the service procedure outlined in this bulletin to update the engine control module to revise the fuel level sensor warning light logic.

GENESIS · 2025-05-13

Certain 2025MY GV80 and GV80 Coupe (JX1) vehicles equipped with the 3.5T-GDI Lambda III engine may NOT experience a warning lamp illumination of DTC P0461/P2066 when the calculated fuel consumption and the fuel consumption calculated from the fuel level sensor signal is over its threshold value.

MERCEDES-BENZ, MERCEDES-MAYBACH · 2025-02-21

Complaint Customer-perceived problem: • Fuel gauge reading implausible • MIL ON (market-dependent) N118/3 Fault codes in control units FSCM_GEN4/5/6 • For these fault codes, the tests contained in XENTRY must be carried out P046109 / P206609 / P13E600 • For these fault codes, the connector couplings/wiring harness routing must be checked for damage P206600 / P046100 Cause Various Remedy Carry out XENTRY tests for the listed fault codes in the FSCM (N118) and document the monitor graphics for the primary/ secondary lever-type sensors.

MERCEDES-BENZ, MERCEDES-MAYBACH · 2025-01-24

Complaint Customer-perceived problem: • Fuel gauge reading implausible • MIL ON (market-dependent) N118/3 Fault codes in control units FSCM_GEN4/5/6 • For these fault codes, the tests contained in XENTRY must be carried out P046109 / P206609 / P13E600 • For these fault codes, the connector couplings/wiring harness routing must be checked for damage P206600 / P046100 Cause Various Remedy Carry out XENTRY tests for the listed fault codes in the FSCM (N118) and document the monitor graphics for the primary/ secondary lever-type sensors.

JEEP · 2024-08-08

"Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ● **P00F3-00 - Humidity Sensor Circuit Range-performance.** ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. ● P0461-00 - Fuel Level Sensor ""A"" Circuit Range/Performance. ● P051B-00 - Crankcase Pressure Sensor Circuit Range/Performance. ● P2F64-00 - Ion Sense Feedback Circuit A. ● P0331-00 - Knock Sensor 2 Circuit Range/Performance. ● P0300-00 - Multiple Cylinder Misfire. ● P2C90-00 - Crankcase Ventilation System - Hose ""A"" Disconnected. ● P0011-00 - Bank 1…

JEEP · 2024-01-17

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? **P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking. ? P06DD-00 - Engine Oil Pressure Control Circuit Performance/Stuck Off. ? P0461-00 - Fuel Level Sensor "A" Circuit Range/Performance. ? P051B-00 - Crankcase Pressure Sensor Circuit Range/Performance. ? P2F64-00 - Ion Sense Feedback Circuit A. ? P0331-00 - Knock Sensor 2 Circuit Range/Performance. ? P0300-00 - Multiple Cylinder Misfire.** ? P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. ? P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or System Performance.…

JEEP · 2024-01-17

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? **P00C6 - Fuel Rail Pressure Too Low - Engine Cranking Bank 1. ? P06DD - Engine Oil Pressure Control Circuit Performance/Stuck Off. ? P0461 - Fuel Level Sensor "A" Circuit Range/Performance.** ? P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected. ? P0604-00 - Internal Control Module Random Access Memory Ram Error. ? P060C-00 - Internal Control Module Main Processor Performance. This bulletin involves reprogramming the PCM with the latest available software.

VOLKSWAGEN · 2023-10-10

Customer states MIL-on, P2402 stored in ECM memory Customer states rattle from below the vehicle Customer states MIL-on, fault P04F0 stored in ECM memory Customer states MIL-on, fault P0461 stored in ECM memory Customer states noise while driving Customer states seat memory is inoperative Customer states driver’s seat creaking or squeaking while driving or when getting in and out of vehicle Customer states key FOB lock/unlock functions do not work via button press (not KESSY)

VOLKSWAGEN · 2023-09-14

Customer states MIL-on, P2402 stored in ECM memory Customer states rattle from below the vehicle Customer states MIL-on, fault P04F0 stored in ECM memory Customer states MIL-on, fault P0461 stored in ECM memory Customer states noise while driving Customer states sun visor is loose/broken Customer states seat memory is inoperative Customer states driver’s seat creaking or squeaking while driving or when getting in and out of vehicle Customer states key FOB lock/unlock functions do not work via button press (not KESSY) Customer states seat memory is inoperative Customer states seat belt won't retract

VOLKSWAGEN · 2023-09-12

Customer states MIL-on, P2421 stored in ECM memory Customer states MIL-on, P2402 stored in ECM memory Customer states rattle from below the vehicle Customer states MIL-on, fault P04F0 stored in ECM memory Customer states MIL-on, fault P0461 stored in ECM memory Customer states noise while driving Customer states sun visor is loose/broken Customer states seat memory is inoperative Customer states key FOB lock/unlock functions do not work via button press (not KESSY) Customer states seat memory is inoperative Customer states seat belt won't retract

HONDA · 2023-06-30

Service Bulletin - The MIL is on with P0461 (Fuel Level Sensor (Fuel Gauge Sending Unit) Circuit Range/Performance Problem). During refueling, the vehicle is unable to recognize the event during wakeup mode or if the vehicle is fueled within 10 seconds after stopping.

RAM · 2023-05-24

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTC)s have been set: ? **P061B-00 - Internal Control Module Torque Calculation Performance. ? P0299-00 - Turbocharger Underboost.** ? P0461-00 - Fuel Level Sensor 1 Performance. ? P0506 - Idle Control System RPM - Lower Than Expected. ? P20EE - NOx Catalyst Efficiency Below Threshold. ? P1451-00 - Diesel Particulate Filter System Performance. ? P242F-00 - Diesel Particulate Filter Restriction - Ash Accumulation. ? P2463-00 - Diesel Particulate Filter Restriction - Soot Accumulation Bank 1. ? P026B - Injection Timing Performance. ? P0607-00 - ECU Internal…

FORD, LINCOLN · 2022-06-30

Some 2022 Expedition/Navigator vehicles built on or before 25-Mar-2022 may experience a fuel gauge that reads empty with DTC P0460:13. DTCs P0461/P0463 may also be present. This may be due to an open circuit in the fuel level sender (FLS). To correct the condition, replace the FLS using service part number NL1Z-9A299-A. Refer to Workshop Manual (WSM), Section 310-01. For claiming, use causal part 9A299 and applicable labor operations in Section 09 of the Service Labor Time Standards (SLTS) Manual.

NISSAN · 2022-04-05

SERVICE INFORMATION FOR FUEL GAUGE INACCURATE WITH DTCS STORED IN ECM SERVICE INFORMATION If a fuel level sensor has been diagnosed as sending an incorrect level signal, and one or more of the following DTCs are stored in the ECM, do not replace the entire “Fuel Level Sensor Unit, Fuel Filter and Fuel Pump Assembly” (fuel pump assembly). The fuel level sensor can be replaced separately. ï‚· P0460 (FUEL LEV SEN SLOSH) ï‚· P0461 (FUEL LEVEL SENSOR) ï‚· P0462 (FUEL LEVL SEN/CIRC) ï‚· P0463 (FUEL LEVL SEN/CIRC) NOTE: Warranty claims referring to fuel level issues that result in the replacement of the entire fuel pump assembly will be charged back.

INFINITI · 2022-04-05

SERVICE INFORMATION FOR FUEL GAUGE INACCURATE WITH DTCS STORED IN ECM SERVICE INFORMATION If a fuel level sensor has been diagnosed as sending an incorrect level signal, and one or more of the following DTCs are stored in the ECM, do not replace the entire “Fuel Level Sensor Unit, Fuel Filter and Fuel Pump Assembly” (fuel pump assembly). The fuel level sensor can be replaced separately. ï‚· P0460 (FUEL LEV SEN SLOSH) ï‚· P0461 (FUEL LEVEL SENSOR) ï‚· P0462 (FUEL LEVL SEN/CIRC) ï‚· P0463 (FUEL LEVL SEN/CIRC) NOTE: Warranty claims referring to fuel level issues that result in the replacement of the entire fuel pump assembly will be charged back.

RAM · 2022-01-01

Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Code (DTC) P0461 ? Fuel Level Sensor 1 Performance Set

VOLKSWAGEN · 2021-07-28

Customer states MIL-on with P013E in the ECM Customer states MIL-on with P0087 P0149 P053F in the ECM Customer states MIL-on with P0461 in the ECM Customer states front suspension noise while driving Customer states the rear view mirror is loose Hood release inoperative Customer states MIL-on with P0401

AUDI · 2021-07-07

This technical service bulletin provides a software code for correcting an issue that causes DTC P046100.

VOLKSWAGEN · 2021-07-06

Customer states MIL-on with P013E in the ECM Customer states MIL-on with P0461 in the ECM Customer states front suspension noise while driving Customer states the rear view mirror is loose Hood release inoperative